• 九游会·J9 - 中国官方网站 | 真人游戏第一品牌

    伯乐S3e Cell Sorter

    产品中心 > 细胞生物学 > 伯乐S3e Cell Sorter

    伯乐S3e Cell Sorter

    The S3e Cell Sorter is the first truly walk-away automated cell sorter. Real-time monitoring and smart features make cell sorting easier and accessible to both novices and experts.

    This compact system is equipped with either one or two lasers and up to four fluorescence detectors plus forward- and side-scatter detectors.

    Features and Benefits of the S3e Cell Sorter

    • Hands-free nozzle tip alignment — features the fully automatic AutoGimbal™ System, driven completely by software

    • Simplified instrument setup — fully automated drop delay calculation, stream alignment, and droplet break-off monitoring enable precise 1–4 color sorting with minimal training

    • Compact design — dimensions of only 70 × 65 × 65 cm (2.3 × 2.1 × 2.1 ft) including onboard fluidics and temperature control system

    • 2-way cell sorting — sort two different defined populations at the same time

    • High speed and high purity — sort cells fast while maintaining high sensitivity and purity

    • Intuitive interface — user-friendly ProSort™ Software enables effortless instrument control and sort logic definition

      Among the many innovations of the S3e Cell Sorter, two key state-of-the-art advancements are ProDrop™ Technology and the AutoGimbal System:

      ProDrop Technology produces extremely accurate and precise results by:

    • Automating drop delay calculation and droplet break-off monitoring

    • Allowing drop delay calculation through direct counting of bead events

    • Simplifying one of the most complex and error-prone aspects of cell sorting

      The highly sophisticated AutoGimbal System automates alignment of the nozzle tip and stream to optics by:

    • Providing hands-free alignment at all points on the stream and consistency in stream position from day to day and user to user

    • Combining picomotor fine motion positioning, imaging, and response to software algorithms using camera images

      The affordable S3e Cell Sorter provides exceptional sort purity, recovery, and yield without compromising performance and sensitivity.

      The system is ideal for sorting cells expressing fluorescent proteins such as eGFP, DsRed, and mCherry, or for cells labeled with fluorescent markers such as antibodies labeled with PE, PE tandems, and other fluorophores excited by the 488, 561, and 640 nm lasers.

    Droplet frequency

    37–43 kHz

    Sorting type

    True jet-in-air for high-performance sorting

    Sorting rate

    No hardware limitations for sort rate, limited only by   droplet frequency and application

    Sorting purity

    >99% pure

    Nozzle size

    100 µm

    Sorting direction

    2-way sorting

    Sorting collection

    Up to 5 x 5 ml sample tubes each direction
      Up to 5 x 1.5 ml tubes each direction
      Microscope slides
      8-well strip each direction

    Lasers

    Single laser: 488 nm 100 mW
      Single-laser upgrade: 488 nm 100 mW plus 561 or 640 nm 100 mW
      Dual laser: 488 and 561 or 640 nW 100 mW

    Detection

    Forward scatter (FSC) with PMT
      Side scatter (SSC) with PMT
      Up to 4 fluorescence detectors with PMT
      Minimum resolution: 0.5 µm

    Sensitivity

    <125 MESF for FITC and PE

    Temperature range

    Sample and collection temperature control system:   4–37°C
      Peltier solid state system

    Fluidics

    Onboard fluidics and dilution of 8x sheath fluid with   deionized water

    Data format

    FCS 3.1

    Dimensions (W x D x H)

    70 x 65 x 65 cm (2.3 x 2.1 x 2.1 ft)

     


    友情链接: